Steel Works
Type A
Qmax=1250m3/h – Hmax=50m APPLICATION The A pumps are universal, general purpose pumps designed to handle different fluids such as clean, cold water, hot water, contaminated water and chemicals. They are applicable in many industries including, for example,… more →
Type A-P
Qmax=1250m3/h – Hmax=50m APPLICATION The A-P pumps are designed to handle chemical products of high temperature and pressure. Due to the robust design, apart from the basic application in chemical plants, the A-P pumps can be applied… more →
Type B
Qmax=5000m3/h – Hmax=90m APPLICATION The B pumps are designed to handle hot, clean and slightly contaminated water. They can be applied in water supply systems, industrial cooling systems, and, for the ability to pump hot water, in… more →
Type D
Qmax=37500m3/h – Hmax=24m APPLICATION D type pumps are typically applied at water intakes and as cooling water pumps in power plants and other industrial installations. They are also applicable in any other cases when high capacity is… more →
Type F and FK
Stationary, single-stage vertical centrifugal pumps with closed impellers of large passages and spiral discharge casings. F pump inlet flanges are positioned horizontally, transverse to the pump centreline and tangentially to the discharge volute. F pumps are… more →
Type FY
Qmax=262m3/h – Hmax=34m APPLICATION The FY type pumps are designed to handle fluids of higher density and viscosity, such as contaminated water, sewage, juices, lime slurries etc. The typical applications include sugar factories, waste water treatment plants,… more →
Type FZ
Submersible, single-stage impeller pumps with various types of flow systems adjusted to pumped utility with multi-blade, channel or free flow impellers (Super-Vortex). The suction stub pipe is positioned vertically, the forcing stub pipe is positioned to… more →
Type HC
Qmax=600m3/h – Hmax=120m APPLICATION HC pumps are designed to handle slurries containing high concentration of solids such as sand, gravel, stone, coal, slag, ores, clay, whitewash, tailings etc. Typical application include: Mines – in coal or ore… more →
Type HCR
Qmax=1200m3/h – Hmax=36m APPLICATION HCR slurry pumps are used for pumping liquids containing substantial amounts of large particle sizes. Permissible pumped liquid density of 1700 kg/m3 is usual, but in individual cases, depending on the type of… more →
Type MF
Qmax=240m3/h – Hmax=37,5m APPLICATION MF pumps are designed to handle slurries containing high concentration of fine solids. Typical application include: Copper ore processing plants Hydraulic transport of sand FGD installations in power plants DESIGN Stationary, horizontal, single-stage… more →