Irrigation Systems
Type OS
Qmax=750m3/h – Hmax=305m APPLICATION The OS-AM, OS-B and OS-C pumps are designed to handle clean and slightly contaminated water containing solids of size up to 2mm. Density of the pumped liquid can be up to 1020 kg/m3… more →
Type OW
Qmax=720m3/h – Hmax=700m APPLICATION The OW-AM and OW-B type pumps are designed for deep mine dewatering. The parameters cover the range required in this application: capacities of hundreds cubic meters per hour and heads up to 800… more →
Type OWH
Qmax=500m3/h – Hmax=1000m APPLICATION The OWH type pumps are designed for deepest mine dewatering. The heads are up to 1000 meters.The robust design of OWH pumps is adequate for adverse operating conditions typical for mine dewatering.The pumps… more →
Type OWZ
Qmax=500 m3/h – Hmax=262 m APPLICATION OWZ pumps are typically applied for open cast mine and deep mine dewatering. They are also applicable in any other case when submersible pumps of high capacity and head are required to pump… more →
Type W
Qmax=1730m3/h – Hmax=150m APPLICATION The W pumps are designed to handle hot, clean and industrial water, of temperature up to 150°C. They can be applied in water supply systems, industrial cooling systems, and for the ability to… more →
Type WN
Qmax=250m3/h – Hmax=280m APPLICATION The WN type pumps are designed to handle hot, clean and industrial water, of temperature up to 150°C. They can be applied in water supply systems, industrial cooling systems, and for the ability… more →
Type ZW
Qmax=23m3/h – Hmax=298m APPLICATION ZW pumps are designed to handle clear water or industrial water. In mining ZW pumps are most often used as sprinkling pumps, located on the equipment combine. In addition ZW pumps are used… more →
Type A
Qmax=1250m3/h – Hmax=50m APPLICATION The A pumps are universal, general purpose pumps designed to handle different fluids such as clean, cold water, hot water, contaminated water and chemicals. They are applicable in many industries including, for example,… more →
Type A-P
Qmax=1250m3/h – Hmax=50m APPLICATION The A-P pumps are designed to handle chemical products of high temperature and pressure. Due to the robust design, apart from the basic application in chemical plants, the A-P pumps can be applied… more →