Mines Dewatering
Type OW
Qmax=720m3/h – Hmax=700m APPLICATION The OW-AM and OW-B type pumps are designed for deep mine dewatering. The parameters cover the range required in this application: capacities of hundreds cubic meters per hour and heads up to 800… more →
Type OWH
Qmax=500m3/h – Hmax=1000m APPLICATION The OWH type pumps are designed for deepest mine dewatering. The heads are up to 1000 meters.The robust design of OWH pumps is adequate for adverse operating conditions typical for mine dewatering.The pumps… more →
Type OWZ
Qmax=500 m3/h – Hmax=262 m APPLICATION OWZ pumps are typically applied for open cast mine and deep mine dewatering. They are also applicable in any other case when submersible pumps of high capacity and head are required to pump… more →
Type W
Qmax=1730m3/h – Hmax=150m APPLICATION The W pumps are designed to handle hot, clean and industrial water, of temperature up to 150°C. They can be applied in water supply systems, industrial cooling systems, and for the ability to… more →
Type YS
Qmax=230m3/h – Hmax=800m APPLICATION YS pumps are designed to handle industrial and boiler water with temperature up to 150°C in all types of industrial installations requiring good suction properties. Typical application include: boiler feeding pumping of condensate… more →
Type A
Qmax=1250m3/h – Hmax=50m APPLICATION The A pumps are universal, general purpose pumps designed to handle different fluids such as clean, cold water, hot water, contaminated water and chemicals. They are applicable in many industries including, for example,… more →
Type A-P
Qmax=1250m3/h – Hmax=50m APPLICATION The A-P pumps are designed to handle chemical products of high temperature and pressure. Due to the robust design, apart from the basic application in chemical plants, the A-P pumps can be applied… more →
Type B
Qmax=5000m3/h – Hmax=90m APPLICATION The B pumps are designed to handle hot, clean and slightly contaminated water. They can be applied in water supply systems, industrial cooling systems, and, for the ability to pump hot water, in… more →
Type D
Qmax=37500m3/h – Hmax=24m APPLICATION D type pumps are typically applied at water intakes and as cooling water pumps in power plants and other industrial installations. They are also applicable in any other cases when high capacity is… more →
Type F and FK
Stationary, single-stage vertical centrifugal pumps with closed impellers of large passages and spiral discharge casings. F pump inlet flanges are positioned horizontally, transverse to the pump centreline and tangentially to the discharge volute. F pumps are… more →